Cables and Adapters

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

JC CBL-1 allows you to identify if a MFI Lightning cable is original or imitated in 1 second.

Magic AWRT Adapter is intended for solving service problems with iWatch SE/S1/S2/S3/S4/S5/S6 (38 mm / 42 mm / 40 mm / 44 mm)

QianLi iSocket is intended for after-repair testing of mother board of iPhone 11 / 11 Pro / 11 Pro Max. Time saver and a handy tool for anyone dealing with iPhone hardware repair

Solves the problem with True Tone and Face ID caused by not original FPC flex cable on iPhone 8 / 8 Pro / X / XR / XS /XS Max / 11 / 11 Pro / 11 Pro Max / 12 / 12 Pro / 12 Pro Max. Works together with JC Pro1000S programmer.

If you connect the phone to the PC using this cable, it will be detected as "Huawei USB COM 1.0 serial port".

Aixun AWRT S-Dock Adapter is intended for restoring / reflashing Apple Watch series S1, S2, S3 (38 mm / 42 mm), S4, S5, S6, SE (40 mm / 44 mm).

BY-T200 Data Assistant is used to read / backup Macbook T2 chip ROM data. It is suitable for MacBook models produced in 2018-2020.

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

JC iHeater Pro is a heating platform for repairing (separating by heating) of motherboards and screen frames on iPhone X - 15 Pro Max.

A handy multifunctional cable that supports all the boxes and dongles available on the market now.

This QianLi flat cable is intended for replacing the faulty battery flex cable on iPhone 11 Pro.

This QianLi flat cable is intended for replacing the faulty battery flex cable on 11 Pro Max.

This QianLi flat cable is intended for replacing the faulty battery flex cable on iPhone 12 / 12 Pro.

This QianLi flat cable is intended for replacing the faulty battery flex cable on iPhone 12 Pro Max.

This QianLi flat cable is intended for replacing the faulty battery flex cable on iPhone 13 / 13 mini.

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 14 / 14 Plus. Works with i2C programmers.

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 14 Pro / 14 Pro Max. Works with i2C programmers.

New platform for convenient and effective BGA reballing of EMMC / EMCP / UFS chips (BGA153 / BGA162 / BGA169 / BGA186 / BGA221 / BGA254 / BGA297). Fixed Plate and Magnetic Base Holder are included.

Intended for direct EMMC memory chips connection with the wide range of supported BGA types.

QianLi iCopy Battery Detection Connection Board allows the users of QianLi iCopy Plus 2.1 programmer (and later versions) to test iPhone batteries.

New Type-C EDL cable from Hydra Team. With this cable you can reboot your device in EDL Mode. No need to use testpoints or pass server authentication.

BGA70 NAND module for reading / writing / formatting NAND data of iPhone 5 SE - 7 Plus / iPad 5 / 6 / 7 / iPad Pro 1 / 2. Intended for JC V1S Pro Programmer.