Search "for testing" in category Repair Equipment

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 800 °C. Response time: 250 ms. D:S ratio: 30:1.

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 1100 °C. Response time: 250 ms. D:S ratio: 20:1.

Core-to-core alignment fusion splicer for SM, MM, DS, NZDS optical fibers. Splice time: quick mode - 7 sec / auto mode - 8 sec, heating time: 13 sec. Ultra-high capacity battery.

Core-to-core alignment fusion splicer for SMF, MMF, DSF, NZDSF, BI optical fibers. Splice time: 7 sec (SM FAST), heating time: 9 sec.

Core-to-core alignment system fusion splicer for SM, MM, DS, NZDS(G655), EDF and other fibers. Splicing time: 8 s, heating time: 35 s.

Handheld and lightweight optical time-domain reflectometer (singlemode) for outdoor use. Wavelength: 1310/1550 nm. Dynamic range: 35/33 dB.

Measuring resistance from 0 MΩ to 20 GΩ. Test voltages may be selected between 500 V / 1000 V / 2500 V.

Handled dual-channel oscilloscope/multimeter with a built-in waveform generator, 40 MHz bandwidth, 250 MSa/s sampling rate, 8K record length, and 3.5-inch LCD display

The fusion splicer with active V-groove alignment is ideal for enterprise, data center, broadband, and FTTH network applications; it is compact and easy to use.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

Measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, period, temperature, connectivity test, diode test. 4.3-inch TFT color LCD.

A powerful compact unit designed to carry out dedicated optical, Ethernet and multi service tests simply and efficiently.

Safe and highly sensitive cable tester with a wide range of features designed to search for and check the condition of cables at a distance of up to 3000 m

This green SC/APC fiber optic connector is used to connect optical fiber cable to form a continuous optical patch.

2 in 1: a fusion splicer and a fiber endface melter. Equipped with 6 motors for precise core-to-core alignment. Splice time: 5 s, heating time: 8 s.

Green optical LC/APC connector with the end face grounded into an 8° bevel. Used for indoor cross-connects where a high density of optical ports is required.

The tool provides up to four output wavelengths: 650 nm red source, 1310/1550 nm wavelengths for single-mode fiber, or 850/1300 nm wavelengths for multimode fiber.

True RMS clamp meter which measures AC and DC voltage, AC current, resistance, continuity, and also may be used for diodes checking.

9 seconds splice time and 30 seconds heat time. Core-core or clad-clad alignment, PAS technology. Designed for splicing SM, MM, NZDS optical fibers.

Four-channel digital oscilloscope with 50 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate.

Four-channel digital oscilloscope with 70 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate. 16-channel logic analyzer.