Z3X Easy-Jtag Plus Box eSIM + eMMC Adapter Set

Z3X Easy-Jtag Plus Box with eMMC Set is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Download software

Outstanding features

• One click device repair
• Boot repair
• Data recovery
• Partition management
• eMMC read/write/erase
• eMMC firmware dump/update
• UFS read/write/erase
• UFS read/write/edit chip configutation, firmware update
• ISP connection for eMMC and UFS based devices
• SPI memory programming
• JTAG connection for old devices
• Partition and HEX editor

Hardware features

• Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
• Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
• Updated power management subsystem – full digital PWM with ADC control
• Added Micro-USB connector (if additional power required)
• Added VCC and VCCQ switch with overcurrent protection
• Updated USB device interface: USB 2.0 480 Mbps (high speed)
• Integrated ISP engine: Z3X high power pro engine (4 MB/s)
• ISP support 1 and 4 bit* connection
• Added eMMC 8-bit high-speed interface up to 42 MHz
• Added UFS 2.0-4.0 protocols support for newest flash memories on the market
• Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
• Integrated M-PHY* interface
• Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
• Integrated self-test core that excludes 90% faults in production
• Integrated secure ECC cryptochip, replacing legacy physical smart-card

Hardware benefits

• Box to Host PC speed increased up to 40 MB/sec
• JTAG Interface speed increased by 20%
• eMMC 1 Bit ISP Speed increased up to 4 MB/sec
• eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
• eMMC 4 Bit Speed up to 18 MB/sec
• eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
• UFS support through socket adapters and by ISP connection
• UFS read/write speed up to 72Mb/sec
• Compatible with 99% host PC systems and OS
• Compatible with old Easy JTAG 1st generation ISP adapters (1 bit)
• Compatible with most of the popular eMMC sockets (with supplied adapters)
• Support for original Z3X UFS sockets and compatibility with Moorc/ICFriend UFS sockes and adapters (whis encryption chip)
• Plug and Play for Windows OS 8/ 8.1/10/11

eMMC Socket - Features:

• Made from high quality materials
• Over 10K cycles of lifetime performance
• Support for a wide range of eMMC ICs
• High-speed up to 40 MB/sec through 8-bit bus
• EMI resistant design, low noise components
• Integrated power logic (no need for additional power source)
• Surge protection - smart fuse driven (0.5A threshold)

Supported OS:

• XP, Vista, 7, 8, 10, 11; 32/64-bit

Package Content

• Z3X Easy-Jtag Plus Box eSIM
• USB A-B Cable - 1 pc.
• eMMC Adapter - 3 pcs.
• Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)

Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our sales managers.

* The developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to differences of hardware/software versions.