Raspberry Pi Pico 2 (RP2350 dual-core, dual-architecture processor)

The Raspberry Pi Pico 2 Dual-Core Mini Development Board is a compact and flexible microcontroller board built around the RP2350 chip, designed for developers, makers, and technicians who need a powerful platform for embedded projects, USB-based tools, and advanced automation.

It combines high performance, broad peripheral support, and USB mass-storage programming in a small form factor that is easy to integrate into custom hardware.

Key Advantages

• Designed around the RP2350 dual-core, dual-architecture platform with Arm Cortex-M33 and Hazard3 RISC-V options.
• Useful for advanced hardware automation, low-level device interaction, and custom technician workflows.
• USB support makes firmware updates and drag-and-drop programming simple and fast.
• Multiple GPIO and interface options make it adaptable for custom tools, test rigs, and control projects.

Features

• Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz
• 520 KB on-chip SRAM
• Software- and hardware-compatible with Raspberry Pi Pico 1
• Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• Robust and fully documented security features:
  • ARM TrustZone for Cortex-M
  • Optional boot signing, enforced by on-chip mask ROM, with key fingerprint in OTP
  • Protected OTP storage for optional boot decryption key
  • Global bus filtering based on Arm or RISC-V security/privilege levels
  • Peripherals, GPIOs, and DMA channels individually assignable to security domains
  • Hardware mitigations for fault injection attacks
• Hardware SHA-256 accelerator
• 2 × UART
• 2 × SPI controllers
• 2 × I2C controllers
• 24 × PWM channels
• 3 x ADC channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 12 × PIO state machines
• Open source C/C++ SDK, MicroPython support
• Operating temperature: -20°C to +85°C
• Supported input voltage: DC 1.8~5.5V

Application

• This board is a strong fit for users building advanced DFU-related and low-level service workflows, especially in repair and lab environments where a programmable controller is useful.
• It can be used for automated entry into low-level device states, hardware-assisted recovery or restore routines, and custom bench setups for repeatable service procedures.
• It is also suitable for USB bridge projects, embedded prototypes, and technician tools that require flexible input/output control.

Read Before Using

This board is best suited for users with moderate to advanced technical skills.

Other options

RP2350-USB-A board is a more compact, USB-focused module with an onboard USB Type-A expansion port, 15 GPIOs, and 2 MB flash memory.

RP2350-USB-A Mini Board vs Raspberry Pi Pico 2 Board

Package Content

• Raspberry Pi Pico 2 Dual-Core Mini Development Board (MicroPython support)- 1 pc.

Note! This product is not covered by the warranty and cannot be returned!

Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our sales managers.