Search "for testing" in category Test & Measuring Equipment

True RMS digital multimeter which measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature and can be used for continuity, transistor and diode tests.

The tool used to measure AC/DC voltage, AC/DC current, resistance, frequency, capacitance, temperature, as well as to perform live wire/continuity/diode testing.

A reliable True RMS multimeter used to measure AC/DC voltage and current, capacitance, frequency, resistance, duty cycle, and temperature, and to perform diode and continuity tests.

True RMS multimeter with data recorder which measures AC/DC voltage and current, resistance, admittance, capacitance, frequency, temperature, duty cycle, pulse width and can be used for continuity and diode tests.

Device designed for automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors and other devices.

Power analysis software for RIGOL DS6000, DS/MSO4000, DS/MSO2000 series oscilloscopes

Handheld earth clamp meter for measuring ground resistance (0.01 to 1000 Ω) and leakage current.

Handheld battery powered instrument, designed for identifying phase sequence, missing phase and motor rotation direction.

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 800 °C. Response time: 250 ms. D:S ratio: 30:1.

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 1100 °C. Response time: 250 ms. D:S ratio: 20:1.

Measuring resistance from 0 MΩ to 20 GΩ. Test voltages may be selected between 500 V / 1000 V / 2500 V.

Handled dual-channel oscilloscope/multimeter with a built-in waveform generator, 40 MHz bandwidth, 250 MSa/s sampling rate, 8K record length, and 3.5-inch LCD display

Measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, period, temperature, connectivity test, diode test. 4.3-inch TFT color LCD.

True RMS clamp meter which measures AC and DC voltage, AC current, resistance, continuity, and also may be used for diodes checking.

Four-channel digital oscilloscope with 50 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate.

Four-channel digital oscilloscope with 70 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate. 16-channel logic analyzer.

Dual-channel digital oscilloscope with 200 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate.

4 analog channels, 16 digital channels (upgradable), 100 MHz bandwidth, 1 GSa/s (8-channel), 500 MSa/s (16-channel) real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate.

4 channel Super Phosphor Oscilloscop with a 200 MHz bandwidth, a sample rate of 2 GSa/s, a maximum memory depth of 200 MB and a 10.1" display.

4 channel Super Phosphor Oscilloscop with a 100 MHz bandwidth, a sample rate of 2 GSa/s, a maximum memory depth of 200 MB and a 10.1" display.

2 channel Super Phosphor Oscilloscop with a 100 MHz bandwidth, a sample rate of 2 GSa/s, a maximum memory depth of 200 MB and a 10.1" display.

Used to measure DC low resistance through 4-wire method. Unknown wire length calculation (FT/M); two-way data transmission by USB interface.

One-button DC 250/500/1000 V, AC 750 V, 2 GΩ digital insulation resistance meter

2-channel oscilloscope with a 70 MHz bandwidth, 1.25 GSa/s sample rate, 12-bit A/D converter, 25 Mpts memory depth, and a 17.8 cm touch display with 1024x600 pixels.