Digital Oscilloscope FNIRSI DPOX180H

Name: Digital Oscilloscope FNIRSI DPOX180H
Brand: FNIRSI
SKU: 916294
Availability: OutOfStock

id: 916294

General information

Warranty

Price coming soon

General information

Digital Oscilloscope FNIRSI DPOX180H Preview 1

Digital Oscilloscope FNIRSI DPOX180H Preview 2

Digital Oscilloscope FNIRSI DPOX180H Preview 3

1 kg Warranty: 12 months

Portable two-channel digital phosphor oscilloscope with bandwidth up to 180 MHz, sampling rate up to 500 MSa/s, and built-in signal generator

Price coming soon

Impossible to estimate the shipping cost

FNIRSI DPOX180H is a portable two-channel digital oscilloscope with a bandwidth of each channel up to 180 MHz and a sampling rate of up to 500 MSa/s. It features a built-in generator offering 14 standard waveforms including sine, square wave, triangle, pulse, saw, constant voltage, etc. Moreover, it incorporates fluorescence technology to emulate the waveform appearance of analog CRT oscilloscopes.

Features

High sensitivity from 5 mV/div enables analysis of low-level signals
Trigger time ranges from 5 ns to 50 s, facilitating examination of both fast and slow changes in detail
Waveform refresh rate of up to 50000 wfm/s significantly enhances the likelihood of capturing one-time bursts and non-periodic signals
Digital phosphor technology utilizes a color gradient to convey waveform repetition rate
The built-in generator offers 14 standard waveforms and the ability to replicate oscillograms (output voltage: 1 V, frequency: 20 MHz for sine, 10 MHz for other waveforms)
Equipped with a 2.8-inch IPS display with a resolution of 320×240
Real-time waveform capture modes include auto, single, and normal; with rising and falling trigger edge options
ZOOM function provides a convenient tool for detailed analysis, offering magnification ranging from 2 to 1000
Bandwidth limitation feature restricts bandwidth to 20 MHz to filter out high-frequency interference when necessary
Clone function - allows you to generate a signal captured by an oscilloscope
A built-in 3000 mAh battery offers up to 3.5 hours of autonomy
Fast auto-tuning function automatically configures settings for most periodic signals
Frequency Domain Analysis FFT facilitates quick signal analysis
Built-in 120 MB memory for storing up to 250 waveforms or 90 screenshots for viewing and analysis

Technical Specifications

Channels	2
Analog Bandwidth	180 MHz (can be limited to 20 MHz)
Rise Time	2.5 ns
Maximum Sampling Rate	500 MSa/s
Input Coupling	DC/AC
Input Impedance	1 MΩ
Input Capacity	18 pF
Storage Depth	120 Kpts
Vertical Sensitivity	5 mV/div to 10 V/div (1X), accuracy: ±2%
Trigger Time	5 ns/div to 50 s/div, 0.01% accuracy with ZOOM function
Measuring Range	40mV ~ 80V (1X)
Trigger Mode	auto / single / normal
Trigger Edge	Rising/Falling
Cursor Measurement	Frequency/Period/Amplitude
ZOOM Scaling Time Base	available
Digital Phosphor Technology	available
Adjustable Automatic Bandwidth Limitation	available
Color Temperature Display	available
Roll Mode	available
Screenshot Storage	90
Waveform Storage	250 groups
Capture Signal	500
Waveform Manager	available
Waveform Output	available
X-Y Mode	available
FFT	available
High-voltage Burnout Protection	available
Charging/Data Interface	USB
Auto Power-off	between 5 minutes and 2 hours
Max. Input Voltage	400 V
Display	2.8-inch, 320 × 240 pixels, sensor type: IPS
Firmware Ipdate	available
Built-in Battery	3000 mAh (up to 3.5 hours of standby time)
Automatic Measurements	12 kinds
Built-in Signal Generator	14 standard function signals
Dimensions	135 mm × 90 mm × 40 mm
Weight	680 g