Digital Clamp Meter UNI-T UT219DS
General information
UNI-T UT219DS Digital Clamp Meter is 600 A true RMS professional clamp meter with CAT IV 600 V rating. It is industrially designed with IP54 protection and able to withstand 2 meters drop test for measurement in harsh environments. This series is suitable for professional electricians, HVAC/R and motor service technicians.
Features
- LoZ mode (measuring continuity using impedance with low input voltage to reduces ghost voltages)
- 3-phase motor sequence test
- Inrush current
- AC+DC voltage
- Auto/Manual range
- True RMS
- V+A dual display (displays voltage and current at the same time)
- 5 times/s measurement sampling rate
- MAX/MIN
- Relative mode (REL)
- Data hold (H)
- ZERO mode
- 2 m drop test
- IP54 protection
- Auto backlight
- Auto power off
- Low battery indication
Technical Specifications
| Function | Range | Accuracy |
|---|---|---|
| AC current | 600 A | ±(1.8%+6) |
| DC current | 600 A | ±(1.8%+6) |
| AC voltage | 600 V | ±(1%+6) |
| DC voltage | 600 V | ±(0.6%+3) |
| LoZ ACV | 600 V | ±(2.5%+6) |
| Resistance | 60 MΩ | ±(1%+3) |
| Capacitance | 60 mF | ±(4%+7) |
| Frequency | 600 Hz ~ 40 MHz | ±(0.1%+6) |
| Duty cycle | 0.1%~99.9% | ±(2.6%+7) |
| Temperature | -40~1000℃ | ±(2%+5℃) |
| -40~1832℉ | ±(2%+9℉) | |
| AC current frequency response | 40 Hz ~ 400 Hz | |
| AC voltage frequency response | 40 Hz ~ 1 kHz | |
| 3-phase motor sequence test | 600 V | |
| Low pass filter | 1 kHz, 3 db attenuation | |
| Diode test | 3 V | |
| General Characteristics | ||
| Jaw opening | 33 mm | |
| Power Supply | 1.5 V battery (R03) x 3 | |
| Display | LCD, 35 × 31 mm | |
| Size | 235 × 82 × 47 mm | |
| Weight | 310 g | |
Video
Package Contents
- UNI-T UT219DS Digital Clamp Meter — 1 pc.
- Test leads — 1 set
- Point contact temperature probe — 1 pc.
- Carrying bag — 1 pc.
Note! Batteries are not included in the package.
Clamp meter digit capacity:
- 5999
Clamp meter type:
- For AC/DC
- For in-rush current measuring
Clamp meter jaw diameter:
- Diameter 33 mm
Clamp meter DC voltage:
- Up to 600 V
Clamp meter AC voltage:
- Up to 600 V
Clamp meter resistance:
- Up to 60 MOhm
Clamp meter temperature:
- Yes
Clamp meter power:
- No
Clamp meter duty cycle:
- Yes
Clamp meter true RMS:
- Yes
Clamp meter backlight:
- Yes
Clamp meter PC connection:
- No connection to PC
Clamp meter diode test:
- Yes
Clamp meter analog bar graph:
- Yes
Clamp meter capacitance:
- Up to 60 000 μF
Clamp meter continuity test:
- Yes
Clamp meter DC:
- Up to 600 A
Clamp meter AC:
- Up to 600 A
Clamp meter Three-phase voltage measurement:
- No
Clamp meter Three-phase current measurement:
- No
Clamp meter frequency:
- Up to 40 MHz
Clamp meter NCV:
- No
