Search "for testing" in category Other Meters & Testers

Handheld battery powered instrument, designed for identifying phase sequence, missing phase and motor rotation direction.

Used to measure DC low resistance through 4-wire method. Unknown wire length calculation (FT/M); two-way data transmission by USB interface.

Multifunction tester for measuring insulation resistance, voltage, residual-current device (RCD) testing.

Device for loop calibration and maintenance, which has DC voltage/current and loop current measurement functions, selectable steps, and ramp output.

Programmable DC electronic load with high performance. Voltage: 0~150 V. Current: 0~60 A. Maximum Power: 350 W.

Fast copper cables certification tester which guarantees cabling installations comply with all TIA/ISO standards.

16 channels,100 MHz bandwidth, 100 MHz capture frequency. Compatible with software produced by other manufacturers. Reliable data logger.

Device used to measure the coating thickness of the magnetic and non-magnetic conductive matrix in the range up to 1250 μm and 0.1 μm resolution.

300 W DC programmable electronic load. Measurement resolution of 0.1 mV/0.1 mA. Input voltage: 0~150 V. Input current: 0~30 A. Operating modes: CC/CV/CR/CP.

200 W DC programmable electronic load. Input voltage: 0~150 V. Input current: 0~30 A. Operating modes: CV, CC, CR, CP.

300 W DC programmable electronic load. Input voltage: 0~150 V. Input current: 0~30 A. Operating modes: CC/CV/CR/CP.

200 W DC programmable electronic load. Features an input range of 150 V/30 A 200W and 1 mV, 1 mA min. readback resolution

PC based 32 channel logic analyzer with 250 MSa/s and 100 MHz bandwidth.

A portable device with thermal printing, designed for field hardness testing of large equipment, including roller turboshafts, pressure vessels, turbine sets.

Food thermometer with an infrared sensor for non-contact, and a probe for contact measurements. Suitable for ensuring food safety in accordance with HACCP standards.

Low resistance meter using microprocessor technology and 4-wire testing method, ensuring safe, accurate, and reliable measurements

The clamp-type non-contact phase detector is designed for phase detection, live wire examination, power inspection, phase loss judgment, finding breakpoints, and positioning breakpoints.

A three phase power quality analyzer with 4-channel voltage/current real-time waveform display and True RMS values of voltages and currents

Designed to measure laser power in the range of 0 µW~39.99 mW. Equipped with a detection sensor to determine the intensity of a laser beam’s energy output

Portable LPG tank level checker with two-color LED indication based on ultrasonic detection technology

UNI-T UT363S is designed to measure airflow speeds ranging from 0.4 to 30 m/s.

Features contact and non-contact measurements. The tool is used to measure revolutions per minute (RPM), frequency, surface velocity, and length.