Search "for testing" in category Fiber Optic Network Maintenance

This device is designed for testing and troubleshooting optical lines. Dynamic range: 39/38/39 dB. Event dead zone: 0.5 m, attenuation dead zone: 2.5 m.

This device is designed for testing and troubleshooting optical lines. Dynamic range: 39/38/39 dB. Event dead zone: 0.5 m, attenuation dead zone: 2.5 m.

This iOLM-ready device is designed for testing and troubleshooting optical lines. Dynamic range: 39/38/39 dB. Event dead zone: 0.5 m, attenuation dead zone: 2.5 m.

Platform used to carry out optical, Ethernet, multiservice, and RF interference testing. Equipped with FTB-720C-SM1 OTDR module (1310/1550 nm, 36/35 dB)

A single-mode 1310/1550 nm OTDR with a 39 dB dynamic range and an FTTH/PON testing function designed for metro range testing and live fiber troubleshooting

Designed for splicing fiber optics in any environment. Splicing time: 6 s, heating time: 24 s. The 3300 mAh battery provides 200 cycles of splicing/heating.

Automatic fusion splicer for optic fiber splicing with core or cladding fiber alignment. Splicing time: 9 s, heating time: 16-25 s.

Automatic fusion splicer for optic fiber splicing with core or cladding fiber alignment. Splicing time: 9 s, heating time: 15 s.

Automatic fusion splicer for optic fiber splicing with core fiber alignment. Splicing time: 9 s, heating time: 30 s.

Direct core monitoring fusion splicer for ultra fast splicing in every environment. Splicing time: 5 s, heating time: 9 s.

PPM-350C series optical power meter for PON, BPON, GPON, EPON, FTTx networks.

PPM-350C series optical power meter for PON, BPON, GPON, EPON, FTTx networks.

Core-to-core alignment fusion splicer for SM, MM, DS, NZDS optical fibers. Splice time: quick mode - 7 sec / auto mode - 8 sec, heating time: 13 sec. Ultra-high capacity battery.

Core-to-core alignment fusion splicer for SMF, MMF, DSF, NZDSF, BI optical fibers. Splice time: 7 sec (SM FAST), heating time: 9 sec.

Core-to-core alignment system fusion splicer for SM, MM, DS, NZDS(G655), EDF and other fibers. Splicing time: 8 s, heating time: 35 s.

Handheld and lightweight optical time-domain reflectometer (singlemode) for outdoor use. Wavelength: 1310/1550 nm. Dynamic range: 35/33 dB.

The fusion splicer with active V-groove alignment is ideal for enterprise, data center, broadband, and FTTH network applications; it is compact and easy to use.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A robust core alignment fusion splicer, providing consistent, low loss, splice performance. Splicing time: 7-9 sec. Heat time: 13-15 sec.

A powerful compact unit designed to carry out dedicated optical, Ethernet and multi service tests simply and efficiently.

This green SC/APC fiber optic connector is used to connect optical fiber cable to form a continuous optical patch.

2 in 1: a fusion splicer and a fiber endface melter. Equipped with 6 motors for precise core-to-core alignment. Splice time: 5 s, heating time: 8 s.