Infrared BGA Rework Station ACHI IR-PRO-SC + Reballing Accessories Kit
Your price:USD 950,00
Infrared BGA Rework Station ACHI IR-PRO-SC + Reballing Accessories Kit - description:
ACHI IR-PRO-SC Infrared Soldering Station is an all-purpose repair kit, designed specially for recovery of huge circuit boards such as motherboards. With ACHI IR-PRO-SC you may easily install / uninstall chipsets on laptop motherboards, even difficult to repair ACER ones. "Three Rings of Death" - XBOX-360 problem - can be also solved with the help of ACHI IR-PRO-SC.
This infrared soldering station is used for recovering CBGA, CCGA, CSP, QFN, MLF, PGA components and other BGA-chips, as well as replacement of specific components (protective metal shield and plastic connectors).
- Soldering station can be connected to PC through RS232 serial port.
- The soldering station can be programmed and controlled via software included in package.
- 10 temperature curves can be stored at the same time.
- Independent temperature sensors for upper and lower heaters and automatic temperature stabilization system with feedback and PID-control.
|Circuit Board Dimensions||65 × 65 mm|
|Lower Preheater Dimensions||260 × 245 mm|
|Power Consumption||2500 W|
|Power Input||220 V, 50/60 Hz|
|Dimensions||475 × 480 × 420 mm|
ACHI IR-PRO-SC BGA Rework Station
- ACHI IR-PRO-SC infrared soldering station — 1 pc.
- Data cable — 1 pc.
- Adhesive reflective foil — 1 pc.
- User manual — 1 pc.
- CD with demonstration video — 1 pc.
Reballing Accessories Kit
- Reballing station — 1 pc.
- Amtech soldering flux — 1 pc.
- Solder balls (2500 pcs/pack)
- 0.3 mm — 1 pc.
- 0.35 mm — 1 pc.
- 0.4 mm — 1 pc.
- 0.45 mm — 1 pc.
- 0.5 mm — 1 pc.
- 0.55 mm — 1 pc.
- 0.6 mm — 1 pc.
- 0.76 mm — 1 pc.
- Vacuum pick-up tool — 1 pc.
- Kapton tape — 1 pc.
- Goot CP-2015 desoldering wick — 1 pc.
- Brush — 1 pc.
- Scraper — 1 pc.
- BGA stencils — 10 pcs.
- Universal 0.3 mm
- Universal 0.35 mm
- Universal 0.4 mm
- Universal 0.45 mm
- Universal 0.5 mm
- Universal 0.55 mm
- Universal 0.6 (pitch = 1.0 mm)
- Universal 0.6 (pitch = 0.9 mm)
- Universal 0.6 (pitch = 1.1 mm)
- Universal 0.76 (pitch = 1.27 mm)
Infrared soldering station type
With PC synchronization
Infrared soldering station upper heater size
Infrared soldering station bottom heater size
Infrared soldering station heater type
With ceramic emitter
Infrared soldering station PCB holder presence