Cables

GPG USB A-B cable with external power connector is suitable for all boxes on the market with USB A-B connectors. This cable is used to connect the box to PC.

Octoplus Micro UART cable has been developed for Samsung C3300K flash, decode, repair and service and is based on 530k resistor.

A handy ruler for everyday use with all types of pinouts supported by Medusa Pro II. Made of textolite.

Deep flash cable is used for a faulty handset which is damaged deeply in the system and is unable to properly identify the port.

Miracle EDL Cable v1.0 will help you to flash, decode, read pattern lock on Qualcomm-based Xiaomi phones.

This cable allows you to reboot the device into Emergency Download (EDL) mode with no testpoints or server authentication.

Octoplus Dongle Micro UART Cable (based on PL2303) with emulation of COM port allows you to work via UART interface directly without the box, using Octoplus Samsung Dongle only.

E210 Cable with emulation of COM port

Octoplus USB Type-C Cable allows you to service a wide range of mobile phones.

Octopus / Octoplus Box cable with resistance switch for Optimus has been developed for LG P500, P970, P990, P999 and further models flash, decode and service.

New Type-C EDL cable from Hydra Team. With this cable you can reboot your device in EDL Mode. No need to use testpoints or pass server authentication.

This cable is intended for quick entering Recovery mode on the latest iPhones and iPads with a Type-C port.

GPG WX PL2303 Cable for Motorola, Alcatel, Vodafone mobile phones service procedures.

Intended for Magico iFace Tool.

If you connect the phone to the PC using this cable, it will be detected as "Huawei USB COM 1.0 serial port".

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 11. Works with i2C and i2C i6S programmers.

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 11 Pro / 11 Pro Max. Works with i2C and i2C i6S programmers.

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 12 / 12 Mini / 12 Pro. Works with i2C and i2C i6S programmers.

This i2C Flex Cable is intended for replacing the faulty battery flex cable on iPhone 12 Pro Max. Works with i2C and i2C i6S programmers.

UART Clip for NS Pro Box is a multifunctional solution for flashing and decoding LG and Samsung cell phones.

Volcano 8-in-1 is a multipurpose phone servicing cable that is meant to be used with Volcano Box for Chinese mobiles phones decoding, flashing and repair IMEI.

Intended for a whole-device data transfer between any iPhone / iPad.

This flex cable is intended for non-removal repair of Face ID on iPhone XS / XR / XS Max. To be used with iCopy programmer and QianLi iCopy Face ID Recovery and Activation Board.

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 11. Works with JC V1S Programmer