Cables

This cable automatically emulates the original settings of the desired cable mode (EDL mode, Harmony mode, etc.), including the correct resistor value and connecting the right pins together. Due to the variety of colors, you may expect to receive one of a black, red, or yellow cable (as shown in the image) in your package.

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 12 / 12 Mini / 12 Pro. Works with JC V1S Programmer

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 13 / 13 Mini. Works with JC V1S Programmer

A handy multifunctional cable that supports all the boxes and dongles available on the market now.

This flex cable is intended for non-removal repair of Face ID on iPhone 12 / 12 Pro. To be used with V1SE/V1S Pro programmer and JC V1S Face ID Read / Write Board.

This is a standard issue USB 2.0 cable.

RJ50 10P10C Cable is intended to be used for a comprehensive cell phone servicing with Octoplus Box / Medusa Box.

Octopus / Octoplus Box cable with resistance switch for Optimus has been developed for LG P500, P970, P990, P999 and further models flash, decode and service.

Sigma cable for Fly DS105/DS120 is intended for MTK-based phones servicing (phone flashing, phone decoding, repair IMEI, etc.) with SigmaBox tool.

Sigma cable is intended for Motorola EX-series phones servicing (phone flashing, phone decoding, repair IMEI, etc.) with SigmaBox tool.

This Micro SD cable was specially designed to work with special LG Tool decoding features that requires a powered Micro SD card.

Octoplus Micro UART cable has been developed for Samsung C3300K flash, decode, repair and service and is based on 530k resistor.

This cable was developed for Nokia 603 flashing, software repair, decoding with Advance Turbo Flasher, Cyclone Box, Infinity Box, JAF Box, UFS Box, Universal Box, MT Box servicing tools.

GPG S-Boot Cable was specially designed to repair dead boot in Samsung I9300, I9500, N7100 mobile phones. This cable works standalone and doesn't require credits, boxes or dongles

ATF/Cyclone/JAF/MXBOX HTI/UFS/Universal Box F-Bus/USB cable for Nokia 108 flashing, software repair, decoding with JAF, UFS, Cyclone Box, Universal Box and Infinity Box servicing tools.

Probe Cable for Riff Box JTAG

Volcano 8-in-1 is a multipurpose phone servicing cable that is meant to be used with Volcano Box for Chinese mobiles phones decoding, flashing and repair IMEI.

UART Cable with RJ45 and USB Connectors (Based on 523k Resistor)

Regular USB - micro USB cable, branded

Octoplus Dongle Micro UART Cable (based on PL2303) with emulation of COM port allows you to work via UART interface directly without the box, using Octoplus Samsung Dongle only.

E210 Cable with emulation of COM port

Martview All Boot Cable is world`s first multifunctional boot cable.

Octoplus USB Type-C Cable allows you to service a wide range of mobile phones.

A handy ruler for everyday use with all types of pinouts supported by Medusa Pro II. Made of textolite.