Fusion Splicer Fujikura 70S+ “Kit-A” Plus
id: 886136
Video
Made in Japan
id: 886136 18 kg Warranty: 24 months
Core-to-core alignment single fiber splicer designed for splicing single-count optical fibers for telecommunication use, PON/FTTx networks, etc. Splicing time: 6 s, heating time: 9 s.
Compare
Compare
Overview
Video
Warranty
Overview
Fujikura 70S+ Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing takes only 6 seconds, and heating takes only 9 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 110/220 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools.
Features
- Reduced splicing time – 6 seconds only.
- Reduced heating time – 9 seconds only.
- Wireless connection via Bluetooth.
- Splices all known types of fibers.
- Fiber core alignment.
- Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
- Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
- Battery life increased up to 200 full splicing/heating cycles.
- Rotary color anti-glare LCD 4.73", high contrast and vividness.
- Simultaneous display of X and Y axes.
- May splice SC, LC, MPO connectors.
- Automatic: wind-protective lid, heater, fiber holders.
- Increased water, dust and shock resistance, may be used under severe environment conditions.
- Automatic arc calibration.
- Battery BTR-09 is included.
- New comfortable carrying case, optimized for quick operation start.
- The case may be used as a working table.
- Operation manual is installed into the splicer.
- Software update option.
- 2 years of full warranty with the device replacement.
Technical Specifications
| Fujikura 70S+ | Fujikura 80S+ | |
|---|---|---|
| Splicing / Heating | ||
| Typical Splicing Time | 7 sec (for SM) | |
| Typical Heating Time | 14 sec (for 60 mm sleeves) | |
| Applicable Fibers | SMF (ITU-T G.652) MMF (ITU-T G.651) DSF (ITU-T G.653) NZDSF (ITU-TG.655) CSF (ITU-T G.654) Fiber with low sensitivity to bends (ITU-T G.657) Erbium-doped fiber |
|
| Cladding Diameter | 80 μm – 150 μm | |
| Coating Diameter | 100 μm – 1,000 μm | |
| Fiber Cleave Length | 5 – 16 mm | |
| Typical Average Splice Loss | 0,02 dB (SMF) 0,01 dB (mmF) 0,04 dB (DSF) 0,04 dB (NZDSF) |
|
| Splice Loss Estimate | core angular offset fiber deformation |
|
| Return Loss | ≤60 dB | |
| Compatible Protection Sleeves | 60 mm 40 mm micro |
|
| Splicing Modes | 100 user programmable | |
| Heating Modes | 30 (10 preset + 20 user programmable) | |
| Internal Memory | up to 2000 splice results and parameters | |
| Additional Options | ||
| Mechanical Proof Test | stretching force 1.96 – 2.25 N | |
| Electrodes lifetime | 3000 cycles | |
| External Interfaces | USB 1.1, Mini-DIN | |
| Data Display | ||
| Screen type | rotary anti-glare LCD | |
| Screen Size | 4.73" | |
| Colour | Yes | |
| Viewing | Yes (2 CMOS cameras) | |
| Magnification | х200 | |
| Power Supply | ||
| Adapter ADC-19 | 110/220 V AC | |
| Battery BTR-09 | 4000 mAh | |
| Battery Cycles | up to 200 splicing/heating cycles | |
| Operation Conditions | ||
| Temperature | –10 ~ +50°C | |
| Altitude above sea level | 0 ~ 5000 m | |
| RH | 0 ~ 95% | |
| Max. wind velocity | 34 mph / 15 m/s | |
| Storage Conditions | ||
| Temperature | –40 ~ +80 °C | |
| RH | 0 ~ 95% | |
| Protection | ||
| Shock Resistance | height: 76 cm, any surface | |
| Dust Resistance | dust particles from 0.1 to 500 μm | |
| Rain Resistance | 10 mm/h for 10 min | |
| Dimensions & Weight | ||
| Width | 150 mm | |
| Length | 159 mm | |
| Height | 146 mm | |
| Weight | 2,5 kg (with adapter ADC-18) 2,7 kg (with battery BTR-09) |
|
Additional Information
Download Fujikura 70S+ Data Sheet.
Download Fujikura 70S+ Operating Manual.
Video
Package Contents
- Fusion Splicer Fujikura 70S+ — 1 pc.
- Automatic Fiber Optic Cleaver Fujikura CT-50A — 1 pc.
- Detachable Battery BTR-09 — 1 pc.
- Battery charge cord DCC-18 — 1 pc.
- Power adapter/Charger adapter ADC-18 — 1 pc.
- Power cord ACC-XX — 1 pc.
- Spare electrodes
- USB cable USB-01 — 1 pc.
- J-plate JP-05 — 1 pc.
- Alcohol dispenser AP-01 — 1 pc.
- Screwdriver SD-01 — 1 pc.
- CD with Data Connection Software and Video Instruction Manual — 1 pc.
- Carrying Case — 1 pc.
- Strap — 1 pc.
- Short guide — 1 pc.
Video
Warranty
ID: 886136
Fusion Splicer Fujikura 70S+ “Kit-A” Plus
Discontinued
Contact
sales team
sales team
