PowerBank Controller, (100 W, Li-ion, 5 A, with display, 2S, 3S, 4S, 5S, QC4.0, QC3.0, fast Charge, PD)

Name: PowerBank Controller, (100 W, Li-ion, 5 A, with display, 2S, 3S, 4S, 5S, QC4.0, QC3.0, fast Charge, PD)
SKU: 919892
Availability: OutOfStock

id: 919892

General information

Warranty

Price coming soon

General information

PowerBank Controller, (100 W, Li-ion, 5 A, with display, 2S, 3S, 4S, 5S, QC4.0, QC3.0, fast Charge, PD)

It has 5 cells and is compatible with Li-Ion or Li-Pol batteries, with the possibility of setting up to work with LiFePo4.

Price coming soon

Impossible to estimate the shipping cost

Controller for PowerBank 5S – is designed to connect 5 lithium cells and provides charging output power up to 100 W. Supports Li-Ion and Li-Pol batteries, with the possibility of setting up to work with LiFePo4. Thanks to the built-in BMS system, each battery cell is protected against overvoltage and overcharging. The board has several ports for different types of connections, making it a versatile solution for creating a portable charger.

Features

Connection of 5 battery cells: provides an output voltage of 21 V.
Built-in BMS system: protects batteries from overvoltage, overcharging and balances the charge between cells.
6 universal ports: Type-C, Lightning, MicroUSB, Type-A1, Type-A2, DC 5.5x2.1.
Support fast charging: support various protocols such as PD3.0, VOOC, SCP.
Equipped with a display.
Small start-up current: when consuming 50mA, the module will turn on.
The board supports simultaneous external discharge of Type-A1/Type-A2/Type-C ports.
Compact dimensions: 80 mm × 25 mm.

Technical characteristics

Output voltage	5 - 5.5 V
Charging voltage	4.2 V ± 1%
Input voltage	5V / 9V / 12V / 15V / 20V
Maximum charging power	100 W
PPS output	3.3 V - 21 V / 3 A
Exit PD3.0	5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 5 A
QC3.0 output	5-12 V, 200 mV step
Output current	5 V - 3.1 A, 7 V - 2.4 A, 9 V - 2.0 A, 12 V - 1.5 A
Battery type	Lithium polymer battery
Protection	From overvoltage, overcharge, discharge
Compatible protocols	QC3.0, FCP, AFC, PD3.0, VOOC, SCP, OPPO Flash
Fast charging support	Lightning (PD2.0), Type-C (PD3.0, AFC, FCP, SCP, VOOC)
AFC output	5 V / 3 A, 9 V / 2 A, 12 V / 2 A
SCP output	5 V / 4.5 A, 10 V / 2.2 A
VOOC output	5 V / 4 A
Protocol support	PD, VOOC (20 W), SCP (22.5 W), OPPO Flash, Huawei Fast

Charging support for each port

Port	Charging support
DC 5.5x2.1	Input voltage from 5 to 13 V, charging power up to 21 W (1.6 A at 13 V)
Lightning	Input PD2.0
Type-C	Input AFC, FCP, SCP, VOOC, PD3.0, PD2.0; Output PPS, PD3.0, PD2.0, AFC, FCP, QC3+, QC3.0, QC2.0, SCP
Type-A1 / Type-A2	Apple output, AFC, FCP, VOOC, QC3+, QC3.0, QC2.0, SCP
MicroUSB	Input AFC, FCP, SCP

Connection diagram

Precautions and features

Use 4.15V, 4.2V, 4.35V or 4.4V 18650, polymer or triple lithium batteries.
The capacity of a single-row battery should not exceed 25000 mAh, otherwise the readings will be inaccurate.
The board supports 3.65V lithium-iron-phosphate batteries, but is not compatible with disposable, nickel-metal hydride, nickel-chromium, or lead-acid batteries.
Minimum — 2, maximum — 5 batteries, the total voltage should not exceed 23 V.
Charging/discharging current — at least 10 A.
Check the connection by watching the LED indicator before soldering.
Use at least 16AWG wire to handle up to 10A.
Do not connect more than one chain in series, only in parallel.
Li-ion batteries must be charged to the same voltage.
Do not install the protection board on the batteries intended for the PowerBank, which may limit the current.
Observe the polarity of the connection, otherwise the board will burn.
The motherboard supports 2-5 batteries; for six lithium-iron-phosphate cells, a separate protection board with an overload current of more than 15 A is required.