You are looking for

You can add the product to favorities
The product has already been added to favorities
You can increase the quantity for this item
In the cart is the maximum quantity of this product
Stock in Hong Kong
Stock in China
The item is out of stock
The item is in/out of stock, quantity 1-4 pcs.
The item is in stock 5-10 pcs.
The item is in stock, more than 10 pcs.
Looking for a spare part? Let's look for it together!
/*Let's save money|layout*/

Fusion Splicer Fujikura FSM-60S

Wish List
Product is discontinued
ID: 815755  |  Weight: 16 kg  |  Warranty: 12 month (s)

Fusion Splicer Fujikura FSM-60S - description: 

Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test.

Fujikura FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.

New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.


  • Rugged construction providing shock, dust and moisture resistance
  • Dual monitor position with automatic image orientation
  • Automatic arc calibration and iber identiication
  • User-selectable iber clamping method sheath clamp or iber holders
  • Auto-start tube heater feature
  • Color LCD display with anti-relective coating for excellent visibility in bright sunlight
  • Simultaneous battery charge and splicer operation
  • Long life battery (up to 160 splice/heat cycles per charge)
  • Detachable work table incorporated into the transit case
  • Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
  • Green friendly RoHS & WEEE compliant

Technical Specifications

Applicable Fibers Single-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter 80 mkm to150 mkm
Coating Diameter 100 mkm to 1,000 mkm
Fiber Cleave Length 8 to 16mm with 250mkm coating diameter, 16mm with 900mkm coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time Typical 9 seconds with standard single-mode iber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Results Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Conditions 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50 °C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice/Heat Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication. mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection maximum wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm
5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter ADC-11;
2.7 kg (5.9 lbs) with BTR-08 battery

Video Review


Download Fusion Splicer Fujikura FSM-60S Manuals.

Package Contents

  • Fujikura FSM-60S Fusion Splicer Unit (1 pc.)
  • Spare electrodes ELCT2-20A (4 pcs.)
  • Splice Sleeve Cooling Tray JP-05 (1 pc.)
  • Power AC Adaptor/Battery Charger ADC-13 (1 pc.)
  • USB cable for PC connection USB-01 (1 pc.)
  • Power cord ACC-15 (1 pc.)
  • Short guide (1 pc.)
  • User manual (1 pc.)
  • CD with FSM Data Connection Software and Video Instruction Manual (1 pc.)
  • Power cord for external battery connection (with crocodile clips) DCC-13, or power cord for connection to a car cigarette lighter DCC-12 (1 pc.)
  • Warranty service coupon (1 pc.)
  • Carrying case CC-24-60S (1 pc.)
  • Carrying belt (1 pc.)

Optional items in Fujikura FSM-60S Fusion Splicer Kit-A Package:

Optional items in Fujikura FSM-60S Fusion Splicer Kit-B Package:

comments powered by Disqus
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock