You are looking for

Intended for

No products found for your request.

Use the general search.

Characteristics

Legend
You can add the product to favorities
The product has already been added to favorities
You can increase the quantity for this item
In the cart is the maximum quantity of this product
HK
Stock in Hong Kong
CN
Stock in China
HK
The item is out of stock
The item is in/out of stock, quantity 1-4 pcs.
The item is in stock 5-10 pcs.
The item is in stock, more than 10 pcs.
Looking for a spare part? Let's look for it together!
/*Let's save money|layout*/

Frame Laminating Machine TL-518 for Apple iPhone 4, iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone SE Cell Phones, (frame unsticking function, to separate LCD module, to cut UV glue)

Wish List
Price:
USD 500,00
- +
Only 100 in stock
Items added to Сart
ID: 861361  |  Weight: 28 kg  |  Warranty: 6 month (s)
Availability in stock: HK EU CN  |  Estimate shipping cost
Description|Similar products|See also|Spare Parts Quality Levels
 

Frame Laminating Machine TL-518 for Apple iPhone 4, iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone SE Cell Phones, (frame unsticking function, to separate LCD module, to cut UV glue) - description: 

TL-518 is a multifunctional device for display module repair. It combines functions of

  • separator
  • iPhone frame gluing device
  • Samsung frame unsticking device
  • UV glue, OCA and polarizing films removal device
  • device for adhesive heating/softening

How to Use As a Separator

  • Place the display module on the silicone pad on the platform.
  • Turn the separator on. The Power button is from the left side on the front panel.
  • Set the temperature at approximately 100 - 120 °C.
  • To turn on the compressor, press the first button on the right panel.
  • When the separator is heated to the required temperature, take the wire and place it between the glass and the touchscreen. Leaning on the side rails move the wire left and right and pull it at the same time to cut off the glue.

Frame Unsticking in Samsung

  • Place the display module with the frame so that the touchscreen is in front of you.
  • The temperature must be approximately at 70 -90 °C. As soon as the platform is heated to the necessary temperature, unglue the LCD module with the help of mediator or spudger.
  • Turn on the vacuum pump to fix the frame. Press the second red button on the side panel, which is located under the platform on the right/left side respectively.
  • When the platform is heated to the required temperature, use a blade or a mediator to unstick the display module.

UV glue, OCA and polarizing Films Removing

Before using the device, install the blade. The hole for the blade is on top of the platform under three screws.

  • Place the display module on the silicone pad.
  • Turn the compressor on. The Power button is the first button on the right side panel.
  • Turn the device on, and set the temperature approximately at 80 - 90 °C. The controller and the temperature switch are on the right side of the front panel.
  • When the device is heated to the required temperature, pull forward the platform slowly. All glue is to remain on the cutting edge.

Frame Gluing in iPhone

  • Choose a necessary mold.
  • Place the lower part of the mold on the bottom platform of the device, attach the upper part of the mold to the top platform.
  • Turn the device on and set the controller to the necessary temperature (80-140 °C) depending on the type of the adhesive. The controller and the switch of the temperature are on the right side of the front panel.
  • Attach the frame to the display module and place the LCD with its glass up into the lower part of the mold.
  • Use the handle to put down the top of the platform. Press it to the bottom mold and keep it in this position for 15-20 seconds.
  • Carefully lift the upper platform to pull out the module from the mold. The frame gluing process is completed.

LOCA/OCA Glue Heating (softening)

  • Place the display module on the silicone pad.
  • Set the temperature at approximately 50 to 90 °C. The controller and the temperature switch are on the left side of the front panel.

Package Contents

  • Device — 1 pc.
  • Power cable — 1 pc.
  • Spare blade — 1 pc.
  • Silicone pad — 1 pc.
  • Molds for frame gluing in iPhone 4 / iPhone 4S / iPhone 5 / iPhone 5C, iPhone 5S / iPhone 6 / iPhone 6 Plus
 

Frame Laminating Machine is compatible with the following models of Cell phones:

  • Apple iPhone 5
  • Apple iPhone 5S
  • Apple iPhone 5C
  • Apple iPhone 4
  • Apple iPhone 4S
  • Apple iPhone 6
  • Apple iPhone 6 Plus
  • Apple iPhone SE

Frame laminating machine characteristics 

Frame unsticking function 

To separate LCD module 

To cut UV glue  

You can aslo be interested in the products from the following categories:

Battery Activation Cables
Automatic Film Laminators (OCA, polarization)
LCD Polarization Films

comments powered by Disqus
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock