Analog Oscilloscope GoodWill Instek GOS-6200
id: 833153
id: 833153 12.5 kg 110, 220 V Warranty: 12 months
Dual-channel analog oscilloscope with 200 MHz bandwidth, delayed-sweep timebase and automatic setings.
Compare
Compare
Overview
Warranty
Overview
GoodWill Instek GOS-6200 is an analog dual-channel oscilloscope which features 200 MHz bandwidth, delay-sweep timebase and hold-off function, and can be used for measuring sophisticated signals.
Features
- Bandwidth - 200 MHz
- Cursor readout with 7 measurements
- Built-in 6-digit universal counter
- 10 sets of memory for front panel settings save and recall
- TV-line selection (NTSC, PAL, SECAM)
- 6-inch CRT display
Technical Specifications
| Technical Specifications | |||||
|---|---|---|---|---|---|
| Bandwidth | 200 MHz | ||||
| Vertical System | |||||
| Sensitivity | 2 mV ~ 5 V / div, 11 step in 1-2-5 sequence | ||||
| Bandwidth (-3dB) | DC ~ 200 MHz (5 mV/div: DC ~ 150 MHz) ; (2mV/div: DC ~ 20 MHz) | ||||
| Rise Time | 1.75 ns | ||||
| Signal Delay | Leading edge can be monitored | ||||
| Max. Input Voltage | 400 V (DC+AC peak) at 1 kHz or less | ||||
| Input Coupling | AC, DC, GND | ||||
| Input Impedance | 1 MΩ ±2% // approx. 25 pF | ||||
| Vertical Mode | CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV. | ||||
| Dynamic Range | 8 div at 100 MHz; 5 div at 200 MHz | ||||
| Horizontal System | |||||
| Horizontal Modes | MAIN (A), ALT, DELAY (B) | ||||
| A (main) Sweep Time | 20 ns ~ 0.5 s/div, continuously variable (UNCAL) | ||||
| B (delay) Sweep Time | 20 ns ~ 50 ms/div | ||||
| Sweep Magnification | x10 (maximum sweep time 2 ns/div) | ||||
| Hold Off Time | Variable | ||||
| Delay Time | 1 μs ~ 5 s | ||||
| Delay Jitter | Better than 1:20000 | ||||
| Trigger | |||||
| Trigger Modes | AUTO, NORM, TV | ||||
| Trigger Source | CH1, CH2, LINE, EXT, EXT/10 | ||||
| Trigger Coupling | AC, DC, HFR, LFR, NR | ||||
| Trigger Slope | "+" or "-" polarity or TVsync polarity | ||||
| Trigger Level Range | INT: ±4 div or more; EXT: ±0.4 V or more; EXT/10: ±4 V or more | ||||
| TV Triggering | Mode: TV-V, TV-H, TV-LINE | ||||
| Cursor Readout Function | |||||
| Cursor Measurement Function | ΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, Δθ | ||||
| Cursor Resolution | 1/100 DIV | ||||
| Panel Setting Display |
|
||||
| Auto Measurement Function | |||||
| Parameter Function | FREQ, PERIOD, ±WIDTH, ±DUTY | ||||
| Display Digits | Max. 6-digits, decimal | ||||
| Frequency Range | 50 Hz ~ 200 MHz | ||||
| Display and General | |||||
| Display Type | 6-inch rectangular type CRT with internal graticule | ||||
| Power | AC 100 V / 120 V / 230 V ±10%, 50/60 Hz | ||||
| Dimensions (W x H x D) | 310 x 150 x 470 mm | ||||
User Manual
Download user manual for GoodWill Instek GOS-6200 analog oscilloscopePackage Contents
- GoodWill Instek GOS-6200 oscilloscope module (1 pc.)
- Switchable passive probe (1 pc.)
- Power cable (1 pc.)
- User manual (1 pc.)
Warranty
ID: 833153
Analog Oscilloscope GoodWill Instek GOS-6200
Discontinued
Contact
sales team
sales team
